• OBD Smart(IDD-212G)  is an onboard diagnotic device that is designed to monitor vehicle emissions and diagnose various types of vehicle data. By integrating a GSM module and G-mouse, data can be transmitted to remote servers for storage and analysis.
  Additionally, real time tracking and positioning function are supported as well.

   

• Features：

  • Compact design, plug and play；
  • On-board audio alarm for fault notification；
  • Built-in memory, 300 hours data storage on-board and unlimited data storage space on remote server；
  • Built-in 3 axes acceleration G-Sensor module for illegal towing alarm ；
  • Compatible with all cars that support OBD II standard protocol；
  • Support user application updating by both wireless network and COM port.；
  • Built in GSM module and GPS module for real time monitoring and remote data transmission；
  • Information can be remote transmitted to the cell phone via GPRS；
  • Automatic enter into power saving state after ignition off, automatic wake up when ignition on.

   

• Fuctions：

  • RECORDER function-DTC(Diagnostic Trouble Codes)scanner
  • Anti-theft
  • Driving behavior analysis-safety driving analysis and economy driving behavior analysis
  • GAUGE vehicle meter recording function
  • Remote monitoring of vehicle emissions

   

  *The above features require optional accessories!

   

• Item	Unit of measurement	Remarks
  Engine speed	RPM	Accurate to 1RPM
  Intake air pressure	MAP	√
  Caused by air temperature	CIA	Accurate to 1℃
  Launched from the load	LOD	√
  Throttle Position	TPS	√
  Fuel pressure	FRP	√
  Ignition timing	ING	√
  Battery voltage	VLT	Accurate to 0.1V
  Fuel system status	LP	√
  Water temperature	CWT	Accurate to 1℃
  Speed	KPH	Accurate to 1KM/hr
  Streamline fuel supply
  Atmospheric pressure
  Emission control efficiency
  Air – fuel transfer rate
  Deceleration point of collision
  Oxygen sensor value

   

• Remote control vehicle emissions:

  OBD-Smart vehicle exhaust gas detection equipment

   If the emission control system components related to aging or damaged for testing.
  Alarm device to alert drivers to maintain and repair emission control systems.

   Using standard encoding, easy to read.

• Testing include：

  • CCM detection;
  • catalytic detection;
  • oxygen sensor detection；
  • fuel to streamline testing;
  • Steam control system test;
  • exhaust gas return Circle detection;
  • secondary air injection system testing

   

• Platform software features:

  Real-time monitoring of vehicle exhaust data, error type, time and circumstances.
  On a regular basis to remind drivers to maintain records exhaust.

• OBD-Smart more features:

  PC and wireless network set up by product parameters;

  Easy to install, plug and play;

  Automatic data storage, backup, data is not lost;

  Data in the device can store 500 hours of data server with unlimited storage space

  Turn off automatically after a power-saving mode;

   Wake up automatically when the ignition.

   Using standard encoding, easy to read.

• Technical Parameters：

  • Electrical parameters
    Working voltage: DC12V；
    Power input：DC9 – 36V
    Data transmission by：GPRS
    GSM frequency：800/900/1800/1900MHz quad band
    Positioned by：GPS
    Avg.working current： Standby working current： Working temperature：-30℃ – +70℃
    Storage temperature：-40℃ – +85℃
    Relative humidity：20% – 80%
    Protection class：IP30
  • GSM/GPRS parameters
    GSM module：Telit
    GSM/GPRS receiving frequency：850/900/1800/1900MHZ quad-band GSM frequency
    Network communication protocol：Embedded-in TCP/IP protocol
    Working voltage：DC3.4V – 4.2V（Recommend: DC3.8V）
• GPS parameters
  GPS chip：SIRF StarIII
  Channels：20 Channels
  Receiving frequency：1575.42MHz
  Cold start：approx 42s, typical TTFF（95%）
  Warm start：approx 38s, typical TTFF（95%）
  Hot start：approx 1s, typical TTFF（95%）
  Antenna：built-in porcelain ANT

※Specifications are subject to change without notice.